3 Way WP Connector Adaptor Kit to H11 Factory FOG connector (To Universal Harness System) (pair)
H11 Style Connector - Clip on the SIDES and top
MAIN APPLICATION/DESCRIPTION-
Works with Various Series Lights that use the 3 way Weather Pack connectors. Or any of our plug in adapters to match any light.
These have backlight ports so you can add power to lights such as the Radiance, 360, or Diode Dynamics lights with the use of our backlights Y harness, with or without one of our plug in marker adapters or a switch.
(These will fit the BRONCO with factory fog lights INSTALLED)
MAIN APPLICATION/DESCRIPTION-
Connects to the factory fog connection in many vehicles. Plugs directly into an aftermarket light that has 3 wires. Such as Rigid Radiance or Diode Dynamics with Backlight.
These will plug into the factory fog light connectors of Ford vehicles and many others, such as the F-150 or Ram with Halogen style connectors. This allows quick plug n play connection for a pair of SAE lights for use on the factory switch. (Limit Amp draw can be placed on the factory circuit. Generally 2-3 amps per side max.)
Please note.
For Rigid Radiance/Scene, you would want to add on matching single 3 Way female WP connectors (Also in our Harness Section).
Click HERE for the single ADD ON Connectors for lights with bare wires
For Diode Dynamics you would want to add on the 4 Way DT adapter Also in our harness section.
Click HERE for 4 Way DT Adapters for Diode Dynamics
Then for either, you can add a backlight Y Harness to connect to 4 lights/connectors that will run a single connection up to the engine bay/fire wall area to power the backlights. You can either connect this harness to a single switch, or to our optional Parking/Marker adapter.
Click HERE for the Backlight Y Harness
Harness System Description-
This harness is part of our UNIVERSAL harness system. Each harness can be used for virtually ANY vehicle and ANY lighting application with the use of our many adapters and modules. Each adapter or module will simply plug into the harness to fit virtually ANY light.
For example, if you have any light such as Rigid Radiance, Scene, 360, or any other make and model WITHOUT connectors on the bare wires with the lights. You will simply add on the included matching connectors in the included kit.
If you have lights WITH connectors on them, you just add the correct connector adaptor type. Some examples of connector adapters are- Rigid Pro Series lights or Single stage lights use DT connectors. Baja Designs (For the most part) use WP Connectors. If you have a 3 wire light (With the Amber/Multicolor background) you can use the included plug pack to either add to your lights 90% of the time, or your light will most likely already have the 3 way WP connectors on them, which will match to these harnesses.
These harnesses also can be interconnected to other adapters from the system. Including Tail Light or Marker Light Trigger adapters to trigger reverse lights, marker lights to backlit lighting, etc.
See other optional components to BUILD YOUR LIGHTING SYSTEM!!
IMPORTANT!!!
This Component is a stand alone harness that is all you will need in applications like the Ford F-150 Raptor, where you are connecting in to the vehicles BUILT IN RELAYS and FUSES. This harness is not FUSED and therefore, if you are connecting it direct to ANYTHING other than a fused circuit, you MUST connect our add on Relay/Fuse adaptor to protect your lights and vehicle from fire. We are NOT responsible for incorrectly installed equipment. If you have questions, please refer to the chart, instructions or reach out to us so we can guide you.
Component of the SPV Harness System-
PATENTED - US 11,699,537 B2
