SPV Parts Harness 3 Foot Extension with Single Pin Connectors (To Switches) - SPV Harness System

Save $3.12
No reviews

1 or 2 Wire (Red and White) Power Only or 3 Wire with Ground and Ring: 2 Wire (Red and White only with connectors)
Sale price$14.87 Regular price$17.99


This 3 Foot Extension is designed to add to the SPV Harnesses at the SWITCH or TRIGGER end. Typically in an engine bay. 

If your harness is too short on the engine bay side (For example an extra long Crew Cab truck with 8 foot bed with our full length rear harness) and you need to extend it to reach switches. This will add another 3 foot to it. Simple Plug N Play


Works all SPV Parts Plug N Play Harnesses

      Harness System Description-

      This harness is part of our UNIVERSAL harness system. Each harness can be used for virtually ANY vehicle and ANY lighting application with the use of our many adapters and modules. Each adapter or module will simply plug into the harness to fit virtually ANY light.
      For example, if you have any light such as Rigid Radiance, Scene, 360, or any other make and model WITHOUT connectors on the bare wires with the lights. You will simply add on the included matching connectors in the included kit. 
      If you have lights WITH connectors on them, you just add the correct connector adaptor type. Some examples of connector adapters are- Rigid Pro Series lights or Single stage lights use DT connectors. Baja Designs (For the most part) use WP Connectors. If you have a 3 wire light (With the Amber/Multicolor background) you can use the included plug pack to either add to your lights 90% of the time, or your light will most likely already have the 3 way WP connectors on them, which will match to these harnesses. 

      These harnesses also can be interconnected to other adapters from the system. Including Tail Light or Marker Light Trigger adapters to trigger reverse lights, marker lights to backlit lighting, etc. 

      See other optional components to BUILD YOUR LIGHTING SYSTEM!!


      This Component is a stand alone harness that is all you will need in applications like the Ford F-150 Raptor, where you are connecting in to the vehicles BUILT IN RELAYS and FUSES. This harness is not FUSED and therefore, if you are connecting it direct to ANYTHING other than a fused circuit, you MUST connect our add on Relay/Fuse adaptor to protect your lights and vehicle from fire. We are NOT responsible for incorrectly installed equipment. If you have questions, please refer to the chart, instructions or reach out to us so we can guide you.

      Component of the SPV Harness System-

      PATENTED - US 11,699,537 B2

      You may also like

      Recently viewed