3 Pole to 1 pole WP Connector Adaptor Kit WITH BACKLIGHT PORT tap

This adapter is designed to plug into any of our harnesses to convert the 3 Pole connector to just 1 single pole white wire for backlights to another fog adapter with backlight port. 

This eliminates the need to add an additional harness for backlights when using a factory fog connector/switch adapter. 

Unlike Our 3 Pole to 3 Pole Backlight Port Tap. This one will not allow use of the connector it plugs into for anything other than a backlight port. An example use for this would be if you have one of our Triple Pair fog harnesses and only want to use 2 of the 3 pairs for lights and the 3rd pair you wanted to use a factory fog connector. In this case, you could use the 3rd pair of connectors just to supply the backlight power with these to your fog adapters.

Works with Various Series Lights that use the 3 way Weather Pack connectors. Or any of our plug in adapters to match any light. 

These have backlight ports so you can add power to lights such as the Radiance, 360, or Diode Dynamics lights with the use of our backlights Y harness, with or without one of our plug in marker adapters or a switch.

Connects to the factory fog PREP connection in the Bronco with Factory Capable Bumper. Plugs directly into an aftermarket light that has 3 wires. Such as Rigid Radiance or Diode Dynamics with Backlight. Some lights have connectors. You will want to select the correct matching adapter OR an add on Female connector kit for each

(Limit Amp draw can be placed on the factory circuit. Generally 2-4 amps per side max.)

Please note.

For Rigid Radiance/Scene, you would want to add on matching single 3 Way female WP connectors (Also in our Harness Section).

Click HERE for the single ADD ON Connectors for lights with bare wires

For Diode Dynamics you would want to add on the 4 Way DT adapter Also in our harness section.

Click HERE for 4 Way DT Adapters for Diode Dynamics

Then for either, you can add a backlight Y Harness to connect to 4 lights/connectors that will run a single connection up to the engine bay/fire wall area to power the backlights. You can either connect this harness to a single switch, or to our optional Parking/Marker adapter.

Click HERE for the Backlight Y Harness

You can also add on our Parking/Marker/Headlight adapter to power backlights automatically

Click HERE for the Headlight Adapter