Some lights, such as the Rigid Radiance/Scene/360 don't have connectors on them.
Our Plug N Play Harness System has connectors and adapters to match to virtually any light model or brand.
Our harnesses come with matching connectors and pins for both lights that have bare wires, and the factory aux wires in your vehicle that has bare wires. Installing those pins can be easy for most, with a proper crimp tool. However, for others, it can be a challenge.
We always want to provide the most OEM like products, with the HIGHEST quality standards. All while providing the easiest installation process. We strive to provide the best experience when it comes to adding any of our products.
With all that in mind. We have come out with an optional pig tail pin set for lights and switch wires. If you are intimidated putting the bare pin on your switch wires or lights and would prefer a more conventional connection, all while maintaining the weatherproof benefit of our harness system. These pig tail kits may be for you.
You will still use the included connectors that come with your harness kit. You just won't need to use the standard pins in that kit. You can install those connectors on these pig tails instead.
There are 2 complete kits. (For BOTH lights and switch wire ends, such as Rigid Radiance/Scene/360)
Kit #1 (2 Lights)-
For any of our harnesses with 2 lights, such as A-Pillar, Single Pair Fog, Rear Harnesses... You can select the 2 light kit. It will include 2 white, 2 red, and 2 black wires with male (pointed) pins already crimped on, with a heat shrinkable butt connector on the other end. Those are to add to your lights.
Then it will include 2 blue wires with the female tubular pins and butt connectors for the switch wire ends. (One for the main light, one for the back light if needed)
Kit #2 (6 Lights)-
For any of our triple fog harnesses with 6 lights.. You can select the 6 light kit. It will include 6 white, 6 red, and 6 black wires with male (pointed) pins already crimped on, with a heat shrinkable butt connector on the other end. Those are to add to your lights.
Then it will include 4 blue wires with the female tubular pins and butt connectors for the switch wire ends. (3 for the main lights, one for the back light if needed)
Kit #3 Switch Wire Pig Tail ONLY-
For those with other lights that do have connectors on the lights. Our adapters will just plug in. So you would only need the ends for the switch wires. This set will just be a set of 3 blue wires with tubular male pins for the switch wires. This will cover you for up to 3 sets of lights for the triple fog harness or any 2 light harness.
Please note. If all you are getting are switch wire ends and want all 6. You may want to look at our new Aux Wire extension set which is numbered and labeled 1-6. These kits are just designed to replace the standard pin install process.