Description
Tail Light Adapters
MAIN APPLICATION/DESCRIPTION-
NOTE: This is not intended to be used Alone. These adapters do NOT have a Ground. The red wire is for the reverse trigger and the white wire is for tail/running lights. These adapters plug into our Short or our Full rear harnesses to supply power. Those harnesses contain a ground and connectors for lights.
These add on adapters connect to the factory tail lights of MOST vehicles. (More makes/models coming soon)
You simply plug the adapter into your tail light, and the factory harness into it. The other end connects to our FULL LENGTH Rear Harness which will on demand, trigger the aftermarket rear lights when in reverse, as well as power the backlights to them when the parking lights/marker lights are on.
If you have a front harness as well as this with amber (or other) backlights, you can interconnect the white wires of the front and rear harness, which will power the front backlights from the rear harness as well.
Harness System Description-
This harness is part of our UNIVERSAL harness system. Each harness can be used for virtually ANY vehicle and ANY lighting application with the use of our many adapters and modules. Each adapter or module will simply plug into the harness to fit virtually ANY light.
For example, if you have any light such as Rigid Radiance, Scene, 360, or any other make and model WITHOUT connectors on the bare wires with the lights. You will simply add on the included matching connectors in the included kit.
If you have lights WITH connectors on them, you just add the correct connector adaptor type. Some examples of connector adapters are- Rigid Pro Series lights or Single stage lights use DT connectors. Baja Designs (For the most part) use WP Connectors. If you have a 3 wire light (With the Amber/Multicolor background) you can use the included plug pack to either add to your lights 90% of the time, or your light will most likely already have the 3 way WP connectors on them, which will match to these harnesses.