Description
HEAVY DUTY GAUGE LIGHT BAR HARNESS (Now Includes Built In Relay)
MAIN APPLICATION/DESCRIPTION-
Already cut to length, just plug in a single light or light bar to your vehicle. This harness will run from one light/ Bar to the fire wall of any truck. The Heavy-Duty Gauge Light Bar Harness is 10awg wire and can support up to 40 amps total in general on the circuit. (We have a SD Light bar harness as well with 14AWG that can hold up to 20 amps and it can be used with or without a relay)
This is a direct component harness to connect a single light to ANY Ford Raptor, or Ford Superduty, Bronco, ETC with built in switches.
OR
Any other vehicle (Or higher amp switch requirements), with the use of our add on relay/fuse adaptors*
(See detailed instructions for various applications and see below)
You can also add a splitter if you want to connect multiple lights UP TO the recommended amp draw.
Harness System Description-
This harness is part of our UNIVERSAL harness system. Each harness can be used for virtually ANY vehicle and ANY lighting application with the use of our many adapters and modules. Each adapter or module will simply plug into the harness to fit virtually ANY light.
For example, if you have any light such as Rigid Radiance, Scene, 360, or any other make and model WITHOUT connectors on the bare wires with the lights. You will simply add on the included matching connectors in the included kit.
If you have lights WITH connectors on them, you just add the correct connector adaptor type. Some examples of connector adapters are- Rigid Pro Series lights or Single stage lights use DT connectors. Baja Designs (For the most part) use WP Connectors. If you have a 3 wire light (With the Amber/Multicolor background) you can use the included plug pack to either add to your lights 90% of the time, or your light will most likely already have the 3 way WP connectors on them, which will match to these harnesses.