Description
This 3 Foot Extension is designed to add to the SPV Harnesses at the SWITCH or TRIGGER end. Typically in an engine bay.
If your harness is too short on the engine bay side (For example an extra long Crew Cab truck with 8 foot bed with our full length rear harness) and you need to extend it to reach switches. This will add another 3 foot to it. Simple Plug N Play
MAIN APPLICATION/DESCRIPTION-
Works all SPV Parts Plug N Play Harnesses
Harness System Description-
This harness is part of our UNIVERSAL harness system. Each harness can be used for virtually ANY vehicle and ANY lighting application with the use of our many adapters and modules. Each adapter or module will simply plug into the harness to fit virtually ANY light.
For example, if you have any light such as Rigid Radiance, Scene, 360, or any other make and model WITHOUT connectors on the bare wires with the lights. You will simply add on the included matching connectors in the included kit.
If you have lights WITH connectors on them, you just add the correct connector adaptor type. Some examples of connector adapters are- Rigid Pro Series lights or Single stage lights use DT connectors. Baja Designs (For the most part) use WP Connectors. If you have a 3 wire light (With the Amber/Multicolor background) you can use the included plug pack to either add to your lights 90% of the time, or your light will most likely already have the 3 way WP connectors on them, which will match to these harnesses.