2 Pole MOLEX Connector Adaptor (To Universal Harness System/Fog Adapters)
MAIN APPLICATION/DESCRIPTION-
Works with OEM Fog Lights from the Ford or F-150 Raptor (Gen 3)
For those who are converting over a bumper or Ford Branded Fog Lights into a NON Raptor and are looking for a way to connect them. These adapters MATCH the connectors that Ford put on the rigid lights. You can either plug these into one of our Universal Harnesses with 3 poles, or, these will plug into any of our 3 Pole Fog adapters such as H11 for Broncos that originally came with Fogs, or "Bronco Fog Prep" for the ones that came with the modular bumper.
Since you will have 4 lights in the OEM Housings. You can do one of 2 things. You can get 4 of these (2 pairs) and connect to say our triple fog harness or 2 single fog harnesses. Or you can get any number of combinations of our harness splitters. We have Molex Harness splitters as well as 3 Pole WP Harness Splitters.
Harness System Description-
This harness is part of our UNIVERSAL harness system. Each harness can be used for virtually ANY vehicle and ANY lighting application with the use of our many adapters and modules. Each adapter or module will simply plug into the harness to fit virtually ANY light.
For example, if you have any light such as Rigid Radiance, Scene, 360, or any other make and model WITHOUT connectors on the bare wires with the lights. You will simply add on the included matching connectors in the included kit.
If you have lights WITH connectors on them, you just add the correct connector adaptor type. Some examples of connector adapters are- Rigid Pro Series lights or Single stage lights use DT connectors. Baja Designs (For the most part) use WP Connectors. If you have a 3 wire light (With the Amber/Multicolor background) you can use the included plug pack to either add to your lights 90% of the time, or your light will most likely already have the 3 way WP connectors on them, which will match to these harnesses.
These harnesses also can be interconnected to other adapters from the system. Including Tail Light or Marker Light Trigger adapters to trigger reverse lights, marker lights to backlit lighting, etc.
See other optional components to BUILD YOUR LIGHTING SYSTEM!!
IMPORTANT!!!
This Component is a stand alone harness that is all you will need in applications like the Ford F-150 Raptor, where you are connecting in to the vehicles BUILT IN RELAYS and FUSES. This harness is not FUSED and therefore, if you are connecting it direct to ANYTHING other than a fused circuit, you MUST connect our add on Relay/Fuse adaptor to protect your lights and vehicle from fire. We are NOT responsible for incorrectly installed equipment. If you have questions, please refer to the chart, instructions or reach out to us so we can guide you.
Component of the SPV Harness System-
PATENTED - US 11,699,537 B2
