SPV Parts 2021+ Ford Bronco Roof Line HIGH Mount Kit (Multi-Fitment w/ optional Cross-mount)
NEW SPV 2021+ Ford Bronco Roof Line Mount Kit with or Without Cross-mount.
For those concerned about wind noise. Our new HIGH mount kit is 2 inches taller than the Rigid SR Series model and several others. It still accommodates the same 40" Radiance SR or SR Pro Light Bars. Why this extra Hight makes a difference is due to air flow.
With the SOFT TOP mostly, people have complained about excess wind noise with roof mounted light bars on the Bronco. It isn't just the fact that the air is going past a light up there that causes the excess noise. The main issue is due to the gap when low profile lights are so close to the windshield. The air goes UP the windshield as you drive. Normally it could pass straight over the top without too much effort. However, with a LOW profile mount, the air is forced to the bottom of the flat light bar, and then has to squeeze through a TINY gap between the roof and the light bar. That small gap with so much velocity through it causes much more noise than would normally be present. With a soft top, you hear a lot more. Please note. The higher mounts won't eliminate ALL noise. With the soft top, many of you know there is wind noise regardless. However, the tall mounts will reduce that by a lot.
In this mounting kit you will have 2 options. You can purchase just the Post mount kit which will include the 11 gauge Stainless Steel Mounts, Base and Trim. This will allow you to install a Rigid Radiance SR or other SR Light bars. Or, you can select it with the cross mount, which will accommodate a multitude of standard size pod lights across (Typically 8). This allows for a truly custom look.
MOUNTING KIT ONLY - Lights Sold Separately
WARNING - Due to the taller mounts, you may or may not have clearance issues going into a home garage. Always verify clearance prior to entering for the first time.
Also, these mounts are taller and do have more clearance underneath. However, while they will still accommodate most 40" light bars, it is important not to overload them with excess weight. Extremely large or heavy bars/lights may put too much stress on the studs Ford Preinstalled in the Bronco's. We are not responsible for damage to your vehicle from faulty installations.