Description
HD Dual Harness-
Our HD Dual Harness is just like our SD Dual/Single Pair Fog Harness. With ONE EXCEPTION.... Our HD Dual Harness uses 12awg wire. For those BIG lights and Power Draws.
12AWG Can handle up to 25 amps (Connector Pins are limited to 20amps)
MAIN APPLICATION/DESCRIPTION-
Already cut to length, just plug in 1 Light on one side, then 1 on the other.
This is a direct component harness to connect 1 pair of lights/Fog Lights to ANY Ford Raptor, or Ford Superduty, Bronco, ETC with built in switches.
OR
Any other vehicle, with the use of our add on relay/fuse adaptors*
(See detailed instructions for various applications and see below)
Harness System Description-
This harness is part of our UNIVERSAL harness system. Each harness can be used for virtually ANY vehicle and ANY lighting application with the use of our many adapters and modules. Each adapter or module will simply plug into the harness to fit virtually ANY light.
For example, if you have any light such as Rigid Radiance, Scene, 360, or any other make and model WITHOUT connectors on the bare wires with the lights. You will simply add on the included matching connectors in the included kit.
If you have lights WITH connectors on them, you just add the correct connector adaptor type. Some examples of connector adapters are- Rigid Pro Series lights or Single stage lights use DT connectors. Baja Designs (For the most part) use WP Connectors. If you have a 3 wire light (With the Amber/Multicolor background) you can use the included plug pack to either add to your lights 90% of the time, or your light will most likely already have the 3 way WP connectors on them, which will match to these harnesses.